Sion Racking Bay 6000
Tax included where applicable. Delivery calculated at checkout.
QORVANIX Racking — tonnes, filed vertically
The Sion bay is the warehouse's basic sentence: two frames, beams on 50 mm pitch, and a load plaque that turns tonnes into filed objects. Starter and extension logic keeps every future aisle cheaper than the first.
These frames are built the way bridges are built — with numbers first: section moduli chosen with margin, baseplates and anchors specified for a sound concrete slab, and beam connectors that lock with an audible, inspectable click. Galvanised options run outdoors and in coolers; the documentation runs everywhere.
Design & Craft
- Beam locks click in, inspect out — audibly and visibly
- Powder coat RAL 5010 / 7016 or hot-dip galvanised
- Beam pitch adjusts on 50 mm steps without tools
- Frame heights to 12 m within calculation
- Designed to EN 15512; manufacturer's documentation per configuration
- Cold-rolled steel; welds inspected to class by the manufacturer
Specifications
| Frame height | 6 000 mm |
| Load per level | 2 × 900 kg |
| Beam pitch | 50 mm steps |
| Pallet | EUR 800 × 1200 native |
| Finish | RAL 5010 / 7016 or galvanised |
| Weight | ≈ 358 kg |
| Documents | Manufacturer's data + load notices |
Care
Keep load notices legible, anchors torqued to schedule, and never exceed stated beam loads even briefly. Damaged components are replaced, never straightened — racking is repaired by part, not by apology.
Questions, Answered
Can I extend the system later?
That is the design intent: bays extend and beams re-pitch on 50 mm steps within the same system — keep your configuration documents current as it grows.
What about rack inspections?
Racking in use should be inspected regularly by a competent person in line with EN 15635. Damaged components must be replaced, never straightened.
The QORVANIX Promise
Modular systems reconfigure as your warehouse changes — bays extend and beams re-pitch without scrapping the steel.