Rutil Coil Rack System
Tax included where applicable. Delivery calculated at checkout.
QORVANIX Automated — floors that fetch
The Rutil holds the dense stuff: coils cradled, dies on roll-out shelves that change without a crane, moulds addressed and anchored — point loads stated, slab calculations documented.
These frames are built the way bridges are built — with numbers first: section moduli chosen with margin, baseplates and anchors specified for a sound concrete slab, and beam connectors that lock with an audible, inspectable click. Galvanised options run outdoors and in coolers; the documentation runs everywhere.
Design & Craft
- Tolerances to EN 15620; load plaques per bay included
- Coil, die and mould racking with stated point loads
- Powder coat RAL 5010 / 7016 or hot-dip galvanised
- Anchors sized to your slab; torque schedule documented
- Beam locks click in, inspect out — audibly and visibly
- Designed to EN 15512; manufacturer's documentation per configuration
Specifications
| Duty | Coil cradles |
| Unit load | To 3 000 kg |
| Roll-out | Rated fully extended |
| Anchoring | To concrete slab per instructions |
| Finish | RAL 5010 / 7016 |
| Weight | ≈ 640 kg |
| Documents | Manufacturer's data + load notices |
Care
Keep load notices legible, anchors torqued to schedule, and never exceed stated beam loads even briefly. Damaged components are replaced, never straightened — racking is repaired by part, not by apology.
Questions, Answered
Can I extend the system later?
That is the design intent: bays extend and beams re-pitch on 50 mm steps within the same system — keep your configuration documents current as it grows.
Is the racking certified for my loads?
Every configuration is designed by its manufacturer to EN 15512 and ships with per-bay load notices. Compare the stated loads with your pallet weights before ordering — ask us if you are unsure.
The QORVANIX Promise
Modular systems reconfigure as your warehouse changes — bays extend and beams re-pitch without scrapping the steel.