Ortler Racking Bay 6000
Tax included where applicable. Delivery calculated at checkout.
QORVANIX Racking — tonnes, filed vertically
The Ortler bay is the warehouse's basic sentence: two frames, beams on 50 mm pitch, and a load plaque that turns tonnes into filed objects. Starter and extension logic keeps every future aisle cheaper than the first.
Racking is structural engineering sold by the bay: cold-rolled profiles in certified steel, welds inspected to weld-class, and powder coat in RAL 5010 gentian or RAL 7016 anthracite over proper pre-treatment. Every configuration is designed by the manufacturer to EN 15512, tolerated to EN 15620, and delivered with the load plaques that make an inspector nod and move on.
Design & Craft
- Starter + extension logic keeps future aisles cheap
- Designed to EN 15512; manufacturer's documentation per configuration
- Anchors sized to your slab; torque schedule documented
- EUR-pallet geometry native: 800 × 1200 first
- Powder coat RAL 5010 / 7016 or hot-dip galvanised
- Beam pitch adjusts on 50 mm steps without tools
Specifications
| Frame height | 6 000 mm |
| Load per level | 2 × 900 kg |
| Beam pitch | 50 mm steps |
| Pallet | EUR 800 × 1200 native |
| Finish | RAL 5010 / 7016 or galvanised |
| Weight | ≈ 242 kg |
| Documents | Manufacturer's data + load notices |
Care
Walk the aisles monthly: look for bent bracing, dislodged beam locks and missing load notices. Report impacts the day they happen — dented uprights are replaced, never straightened. Book a certified EN 15635 inspection with a competent person yearly.
Questions, Answered
Do you install and anchor it?
No — we do not provide installation. Racking must be anchored as the instructions require; have assembly done by an experienced racking installer and keep the documentation for your insurer.
Can I extend the system later?
That is the design intent: bays extend and beams re-pitch on 50 mm steps within the same system — keep your configuration documents current as it grows.
The QORVANIX Promise
The statutory 24-month warranty under Czech law applies. Racking in use should be inspected regularly by a competent person in line with EN 15635.