Ortler Carton-Flow System
Tax included where applicable. Delivery calculated at checkout.
QORVANIX Racking — tonnes, filed vertically
Dynamic racking pays rent in seconds saved; the Ortler collects daily — brake rollers govern the speed, indexed carts keep depths honest, and every lane re-pitches to the cartons you actually run.
Racking is structural engineering sold by the bay: cold-rolled profiles in certified steel, welds inspected to weld-class, and powder coat in RAL 5010 gentian or RAL 7016 anthracite over proper pre-treatment. Every configuration is designed by the manufacturer to EN 15512, tolerated to EN 15620, and delivered with the load plaques that make an inspector nod and move on.
Design & Craft
- Tolerances to EN 15620; load plaques per bay included
- Brake rollers govern speed at the pick face
- Push-back carts glide on sealed rollers, indexed per depth
- Carton-flow lanes re-pitch to carton sizes in minutes
- FIFO honesty: first in genuinely first out
- Powder coat RAL 5010 / 7016 or hot-dip galvanised
Specifications
| Method | Carton flow, roller lanes |
| Depth | Lane depths to 3 m |
| Logic | FIFO honest |
| Speed | Brake rollers at the face |
| Finish | RAL 5010 / 7016 |
| Weight | ≈ 490 kg |
| Documents | Manufacturer's data + load notices |
Care
Walk the aisles monthly: look for bent bracing, dislodged beam locks and missing load notices. Report impacts the day they happen — dented uprights are replaced, never straightened. Book a certified EN 15635 inspection with a competent person yearly.
Questions, Answered
What about rack inspections?
Racking in use should be inspected regularly by a competent person in line with EN 15635. Damaged components must be replaced, never straightened.
Is the racking certified for my loads?
Every configuration is designed by its manufacturer to EN 15512 and ships with per-bay load notices. Compare the stated loads with your pallet weights before ordering — ask us if you are unsure.
The QORVANIX Promise
The statutory 24-month warranty under Czech law applies. Racking in use should be inspected regularly by a competent person in line with EN 15635.