Nezamysl Coil Rack System
Tax included where applicable. Delivery calculated at checkout.
QORVANIX Automated — floors that fetch
Heavy storage is where guesswork gets expensive fastest; the Nezamysl removes it — beam sections chosen for concentrated steel realities and roll-outs rated with the shelf extended, which is the only rating that matters.
Racking is structural engineering sold by the bay: cold-rolled profiles in certified steel, welds inspected to weld-class, and powder coat in RAL 5010 gentian or RAL 7016 anthracite over proper pre-treatment. Every configuration is designed by the manufacturer to EN 15512, tolerated to EN 15620, and delivered with the load plaques that make an inspector nod and move on.
Design & Craft
- Floor anchoring calculated to your slab, documented
- Coil, die and mould racking with stated point loads
- Powder coat RAL 5010 / 7016 or hot-dip galvanised
- Anchors sized to your slab; torque schedule documented
- Designed to EN 15512; manufacturer's documentation per configuration
- Beam sections chosen for concentrated steel realities
Specifications
| Duty | Coil cradles |
| Unit load | To 3 000 kg |
| Roll-out | Rated fully extended |
| Anchoring | To concrete slab per instructions |
| Finish | RAL 5010 / 7016 |
| Weight | ≈ 517 kg |
| Documents | Manufacturer's data + load notices |
Care
Keep load notices legible, anchors torqued to schedule, and never exceed stated beam loads even briefly. Damaged components are replaced, never straightened — racking is repaired by part, not by apology.
Questions, Answered
Do you install and anchor it?
No — we do not provide installation. Racking must be anchored as the instructions require; have assembly done by an experienced racking installer and keep the documentation for your insurer.
What about rack inspections?
Racking in use should be inspected regularly by a competent person in line with EN 15635. Damaged components must be replaced, never straightened.
The QORVANIX Promise
The statutory 24-month warranty under Czech law applies. Racking in use should be inspected regularly by a competent person in line with EN 15635.