Fortis Drive-In Block — 3 Lane
Tax included where applicable. Delivery calculated at checkout.
QORVANIX Racking — tonnes, filed vertically
The Fortis block stores by the lane, not the aisle: forklifts drive into the structure itself, pallets sit rail-on-rail, and floor space does double duty. Few SKUs, deep volumes, cold stores — this is their geometry.
Racking is structural engineering sold by the bay: cold-rolled profiles in certified steel, welds inspected to weld-class, and powder coat in RAL 5010 gentian or RAL 7016 anthracite over proper pre-treatment. Every configuration is designed by the manufacturer to EN 15512, tolerated to EN 15620, and delivered with the load plaques that make an inspector nod and move on.
Design & Craft
- Tolerances to EN 15620; load plaques per bay included
- Designed to EN 15512; manufacturer's documentation per configuration
- Lane-entry columns armoured as standard
- Anchors sized to your slab; torque schedule documented
- Powder coat RAL 5010 / 7016 or hot-dip galvanised
- Cold-rolled steel; welds inspected to class by the manufacturer
Specifications
| Lanes | 3 |
| Pallet positions | 45–72 |
| Logic | LIFO, lane-deep |
| Guarding | Entry armour + guide rails |
| Finish | Galvanised or RAL 5010 |
| Weight | ≈ 880 kg |
| Documents | Manufacturer's data + load notices |
Care
Keep load notices legible, anchors torqued to schedule, and never exceed stated beam loads even briefly. Damaged components are replaced, never straightened — racking is repaired by part, not by apology.
Questions, Answered
Is the racking certified for my loads?
Every configuration is designed by its manufacturer to EN 15512 and ships with per-bay load notices. Compare the stated loads with your pallet weights before ordering — ask us if you are unsure.
Can I extend the system later?
That is the design intent: bays extend and beams re-pitch on 50 mm steps within the same system — keep your configuration documents current as it grows.
The QORVANIX Promise
The statutory 24-month warranty under Czech law applies. Racking in use should be inspected regularly by a competent person in line with EN 15635.