Cella Carton-Flow System
Tax included where applicable. Delivery calculated at checkout.
QORVANIX Racking — tonnes, filed vertically
The Cella makes gravity an employee: push-back carts glide pallets deep on sealed rollers, carton-flow lanes feed the pick face first-in-first-out, and replenishment stops interrupting picking forever.
Racking is structural engineering sold by the bay: cold-rolled profiles in certified steel, welds inspected to weld-class, and powder coat in RAL 5010 gentian or RAL 7016 anthracite over proper pre-treatment. Every configuration is designed by the manufacturer to EN 15512, tolerated to EN 15620, and delivered with the load plaques that make an inspector nod and move on.
Design & Craft
- Cold-rolled steel; welds inspected to class by the manufacturer
- Carton-flow lanes re-pitch to carton sizes in minutes
- Push-back carts glide on sealed rollers, indexed per depth
- Designed to EN 15512; manufacturer's documentation per configuration
- Tolerances to EN 15620; load plaques per bay included
- Powder coat RAL 5010 / 7016 or hot-dip galvanised
Specifications
| Method | Carton flow, roller lanes |
| Depth | Lane depths to 3 m |
| Logic | FIFO honest |
| Speed | Brake rollers at the face |
| Finish | RAL 5010 / 7016 |
| Weight | ≈ 298 kg |
| Documents | Manufacturer's data + load notices |
Care
Keep load notices legible, anchors torqued to schedule, and never exceed stated beam loads even briefly. Damaged components are replaced, never straightened — racking is repaired by part, not by apology.
Questions, Answered
Do you install and anchor it?
No — we do not provide installation. Racking must be anchored as the instructions require; have assembly done by an experienced racking installer and keep the documentation for your insurer.
Can I extend the system later?
That is the design intent: bays extend and beams re-pitch on 50 mm steps within the same system — keep your configuration documents current as it grows.
The QORVANIX Promise
The statutory 24-month warranty under Czech law applies. Racking in use should be inspected regularly by a competent person in line with EN 15635.