Brenta Racking Bay 3000
Tax included where applicable. Delivery calculated at checkout.
QORVANIX Racking — tonnes, filed vertically
The Brenta bay is the warehouse's basic sentence: two frames, beams on 50 mm pitch, and a load plaque that turns tonnes into filed objects. Starter and extension logic keeps every future aisle cheaper than the first.
These frames are built the way bridges are built — with numbers first: section moduli chosen with margin, baseplates and anchors specified for a sound concrete slab, and beam connectors that lock with an audible, inspectable click. Galvanised options run outdoors and in coolers; the documentation runs everywhere.
Design & Craft
- Powder coat RAL 5010 / 7016 or hot-dip galvanised
- EUR-pallet geometry native: 800 × 1200 first
- Starter + extension logic keeps future aisles cheap
- Cold-rolled steel; welds inspected to class by the manufacturer
- Anchors sized to your slab; torque schedule documented
- Tolerances to EN 15620; load plaques per bay included
Specifications
| Frame height | 3 000 mm |
| Load per level | 2 × 1 000 kg |
| Beam pitch | 50 mm steps |
| Pallet | EUR 800 × 1200 native |
| Finish | RAL 5010 / 7016 or galvanised |
| Weight | ≈ 183 kg |
| Documents | Manufacturer's data + load notices |
Care
Walk the aisles monthly: look for bent bracing, dislodged beam locks and missing load notices. Report impacts the day they happen — dented uprights are replaced, never straightened. Book a certified EN 15635 inspection with a competent person yearly.
Questions, Answered
Can I extend the system later?
That is the design intent: bays extend and beams re-pitch on 50 mm steps within the same system — keep your configuration documents current as it grows.
What about rack inspections?
Racking in use should be inspected regularly by a competent person in line with EN 15635. Damaged components must be replaced, never straightened.
The QORVANIX Promise
The statutory 24-month warranty under Czech law applies. Racking in use should be inspected regularly by a competent person in line with EN 15635.